SPEEDA Technology was founded in 2014, located in Changsha City, Hunan Province. It is an electronic technology company formed by a team with an average of 10+ years of electronic industry experience. The company is mainly engaged in the design, R&D(research and development), manufacturing and sales of various printed circuit boards. The products are widely used in communication equipment, computer and network equipment, consumer electronics, automotive electronics, industrial control, new energy, rail transit and other industries. We provide customers with "one-stop" service, that is, integrated service system consisting of printed circuit board circuit design optimization, small batch sample production, batch production and after-sale services. Adhere to quality first, service first, to improve customer satisfaction as the goal continuously.
We are a leader in high-speed design and have in-depth research and technology accumulation for high-speed sheet and process.
HDI PCB / BLIND&BURIED VIA HOLE PCB / BVH PCB
SPEEDAPCB has been focusing on the production of various PTH (plated through hole PCB), buried via hole PCB and blind via hole PCB, and HDI PCB prototype.
When it comes to blind and buried hole circuit boards, everyone thinks of HDI boards. Generally, there are more blind and buried hole circuit boards used in mobile phones or navigation instruments. Such PCB boards require high technical content and accurate accuracy. Of course, the price is compared with other It is also high for multilayer circuit boards.
HDI high density interconnect pcb : 1 + n + 1, 1 + 1 + n + 1 + 1, 2 + n + 2, 3 + n + 3,
Blind Via Hole is the connection between the outermost circuit in the PCB and the adjacent inner layer with a plated hole. Because the opposite side cannot be seen, it is called blind pass. In order to increase the space utilization between the circuit layers of the board, blind holes come in handy. The blind hole is a via hole to the surface of the printed board.
Buried Via Hole, the connection between any circuit layers in the PCB, but there is no conduction with the outer layer, that is, there is no meaning of a via hole extending to the surface of the circuit board.
The blind holes are located on the top and bottom surfaces of the circuit board and have a certain depth. They are used to connect the surface layer circuits to the inner layer circuits below. The depth of the holes generally has a prescribed ratio (aperture). This manufacturing method requires special attention, and the drilling depth must be just right. Failure to pay attention will cause difficulties in plating inside the hole. Therefore, few factories will adopt this production method. In fact, it is possible to drill the holes of the circuit layers that need to be connected beforehand, and then glue them together, but they need more precise positioning and alignment devices.
This manufacturing process cannot be achieved by bonding the circuit boards and then drilling. It is necessary to perform the drilling operation at the individual circuit layer, firstly locally bond the inner layer, then perform plating treatment, and finally all the bonding. Because the operation process is more laborious than the original vias and blind holes, the price is also the most expensive. This manufacturing process is usually only used for high-density circuit boards, increasing the space utilization of other circuit layers.
In the PCB manufacturing process, drilling is very important. The simple understanding of drilling is to drill the required via holes on the copper clad board, which has the function of providing electrical connections and fixing devices. If the operation of the via is caused by incorrect operation, the device cannot be fixed on the circuit board, which will affect the use of the circuit board, and the entire board will be scrapped. Therefore, the process of drilling is very important.
Parameters of Blind&Buried Via Hole PCB
| Items | Capability. |
| Max board size | 580X700mm |
| Boar Material | FR-4,Aluminum, High Tg FR4,CEM3,etc. |
| Min trace width/ space (inner layer) | 4mil/4mil(0.1mm/0.1mm) |
| Min PAD (inner layer) | 5 mil(0.13mm) |
| Min thickness(inner layer) | 4 mil(0.1mm) |
| Inner copper thickness | 0.5~4 oz |
| Outer copper thickness | 0.4~6 oz |
| Finished board thickness | 0.4-3.2 mm |
| Board thickness tolerance control | ±0.10 mm | ±0.10 mm |
| ±10% | ±10% |
| ±10% | ±10% |
| Inner layer treatment | brown oxidation |
| Layer count Capability | 1-30 LAYER |
| alignment between ML | ±2mil |
| Drill hole diameter | 0.15mm-0.65mm |
| Aspect ratio of plated hole | 10:01 |
| Hole precision | ±2 mil(±0.05mm) |
| tolerance for Slot | ±3 mil(±0.75mm) |
| Hole diameter tolerance(PTH) | ±3 mil(±0.075mm) |
| Hole diameter tolerance(NPTH) | ±1mil(±0.025mm) |
| Max Aspect Ratio for PTH | 8:01 |
| Hole wall copper thickness | 15-50um |
| Alignment of outer layers | 4mil/4mil |
| Min trace width/space for outer layer | 4mil/4mil |
| Tolerance of Etching | +/-10% |
| Thickness of solder mask | on trace |
| Thickness of solder mask | at trace corner | ≥0.2mil(5um) |
| Hardness of solder mask | On base material | ≤+1.2mil |
| 6H | Finished thickness |
| Alignment of solder mask film | ±2mil(+/-50um) |
| Min width of solder mask bridge | 4mil(100um) |
| Max hole with solder plug | 0.5mm |
| Surface treatment | HAL (Lead or Lead free), immersion Gold, Immersion Nickel, Electric Gold finger, plated Gold, OSP, Immersion Silver.carbon oil,etc. |
| Max Nickel thickness for Gold finger | 280u"(7um) |
| Max gold thickness for Gold finger | 30u"(0.75um) |
| Nickel thickness in Immersion Gold | 120u"/240u"(3um/6um) |
| Gold thickness in Immersion Gold | 2u"/6u"(0.05um/0.15um) |
| Impedance control and its tolerance | 50±10%,75±10%,100±10% 110±10% |
| Trace Anti-stripped strength | ≥61B/in(≥107g/mm) |
| bow and twist | 0.75% |
FAQ:
1.What are needed for quotation?
A: PCB: Quantity, Gerber file and Technic requirements(material,surface finish treatment, copper thickness,board thickness ,...)
PCBA Service: PCB information, BOM, (Testing documents...)
Q2. What file formats do you accept for production?
A: Gerber file: CAM350 RS274X
PCB file: Protel 99SE, P-CAD 2001 PCB
BOM: Excel (PDF,word,txt)
Q3.Are my design files secure when I send them to you?
A:Your files are never shared with any third parties, only our colleagues have access to your design files.
Since they are your property, we respect the copyright of your files.
Q4: What about OEM and ODM? and what is the MOQ?
A: We accept both OEM and ODM orders..MOQ is 1 pcs.
Q5: Delivery terms and time?
A: We will ship the goods by DHL,TNT,Fedex,UPS or Aramex.the order can be sent out within 7-30 days depend on your order quantity, customization.
Q6.Shipping cost?
A: The shipping cost is determined by the destination, weight, packing size of the goods. Please let us know if you need us to quote you the shipping cost.
Q7. Packing?
A: Flexible packing according to the specific requirements of the clients.
Q8.Payment?
A: T/T,Western Union.Paypal.
